This is a second chance product. You cannot return this and may have defects if this is explicitly indicated in the text and / or photos.
PLEASE NOTE: Product comes as shown in the photo (s), may have minor scratches or dents. This product has partially broken thread on the front bolt / nut.
Solo Diamond Stitch Bobber Seat Type 2. This seat is universal and the cream of the crop with regard to Biltwell seats! The diamond stitch completes the seat and is a must-have for your bobber or custom.
Please note, the Solo 2 is a bit shorter and a little bit wider than the Solo 1. That's it :)
The base plate is made of heavy steel and is neatly finished with a matt black layer coating. Because the base plate is worked with relief, the strength is very good. The seat has a foam layer of approximately 1 "(2.54mm) thick and is sturdy and comfortable.
Length: 14 "= approx. 356mm
Width: 11.6 "= approx 295mm
Width between bolts: 7.125 "= 181mm
Design: Compared to our original Solo seat, the new Solo II has a shorter overall length and an additional two inches of kick in the tail to deepen the seating area and improve visual flow on steep-backbone bikes. Every other technical specification and silhouette of the Solo II is identical to our proven Solo Seat.
Construction: 1/8-inch thick (3mm) stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting. 2.5 cm thick molded polyurethane foam padding with hand-stitched, sturdy vinyl cover. Four carriage bolts are welded to the bottom of the pan to facilitate mounting of the spring and seat hinges. Your frame may require adjustments to the nose hinge and spring ends for proper mounting.