Kit includes 2 x 1.35M of standard black conduit with Teflon liner, 2 x 2M of inner wire and selection of fittings. One end of both inner wires is fitted with a 6mm O.D. x 5mm barrel nipple (BN575/55). The other ends will need to be cut to length and the required nipples soldered in place. The ferrules and adjusters are a snug fit on the conduit. They can be bonded in place during the assembly or use a centre punch to make a small indentation in their side. The fittings can be adapted for a range of models. Basic soldering kit is needed to solder the nipples in place. Other spare fittings / components can be ordered separately.