The ignition switch holder serves as an optimal solution to install your original ignition key discreetly under the tank. The minimalist design of the holder integrates perfectly into the overall look of your conversion.

• Unobtrusive mounting of the ignition lock under the tank
• High quality stainless steel for stable life
• Compatible for the left and right sides
• No extension of the cables necessary

Assembly: Plug and Play. Easy and fast. At the beginning, the ignition lock is fastened to the ignition lock holder with the supplied mounting material. Now loosen the nut of the upper, front motor holder and pull out the bolt. In reverse order, the ignition switch holder is hand-mounted on the left or right side.
Now hold the starter lock in the desired position and tighten the nut with the torque provided by Triumph.
The original wiring harness of the ignition lock holder is released from the main wiring harness, passed under the tank and connected to the ignition. Finally, the wiring harness must be protected again against abrasion and moisture with insulating tape.

Ignition lock holder, stainless steel, assembly of the ignition lock under the tank, for the left and right side, no extension of the cables necessary

Use: Triumph: Bonneville, Scrambler, Thruxton