Übersicht

Stahldrahtbürste 6 Stück

Kick-Bohrer-Set

Jigsaw mit Laser-800W

Parallel-Schraubstock, drehbar um 360 Grad drehbar, grüm Hammerschlag lackiert, Bohrungen zur stationären Montage, Spannbereich: 100 mm, Backenbreite: 100 mm

9 Locheisen aus Werkzeugstahl
Durchmesser: 2.5, 3, 4, 5, 6, 7, 8, 9, 10 mm
in praktischer Plastikbox

Merkmale:

Für das Heften des Materials von 1 bis 9 mm dick.
Durchschnittene 2.4 / 3.2 / 4.0 und 4.8 mm

Mannesmann Handgewindebohrer M14. Schwere Qualität und kommt in drei Schritten, wie es sollte!

Mutter selbstsichernd 3/8 UNF

Mutter selbstsichernd 3/8 UNC

Mutter selbstsichernd 1/4 UNC (Mindest bestellmenge = 10

Mutter 3/8 UNF

Mutter 3/8 UNC

Innensechskantschraube 5/16 UNF x 1 Zoll

With this weld-in bung you can mount O2 / lambda sensors where they are needed on a custom exhaust.
The bung is made of good weldable steel.
Sold individually.

This license plate holder is suitable for the Dutch and Belgian numberplate (210 mm x 140 mm). It is made out of 3 mm thick steel. You can use it however you want, e.g. against your sissy bar.

This CNC cut tab can be used for example for mounting your rear fender.

It is a solid tab and through the slot adjustable. Ideal for making sissybars.

Good weldable steel 6mm thick

The slot is suitable for 3/8 or M8

25mm wide

Total len...

With this kit you can easily mount hairsprings on your frame. The set consists of two bungs that you can weld to the frame, 2 Stainless steel M8 Allen bolts with round head and 2 stainless steel washers.

Mit diesem Set können Sie Ihren Bobbersitz/Solositz mit wunderschönen Chrom-Haarnadelfedern montieren. Die mitgelieferten Stopfen bestehen aus Weichstahl und müssen an Ihren Rahmen geschweißt werden.

Mit diesem Set können Sie Ihren Bobbersitz/Solositz mit wunderschönen schwarzen Haarnadelfedern montieren. Die mitgelieferten Stopfen bestehen aus Weichstahl und müssen an Ihren Rahmen geschweißt werden.

This Side mount bracket can be welded to, for instance, these Side Mounts:

License plate holder for Stop light
License plate holder for Retro LED Light
License plate holder for license light
License plate holder
The bracket is, like the ab...

This steel bung has 3/8 NPT thread. For example, you can weld it into your gastank so you can screw in a fuel petcock. The dimensions are Ø25 x 15mm.

Sold per piece.

This bung is ø25mm x 20mm with M12 through it. You can weld the bung for example to your fender of oil tank. Ideal for making sissy bars.
This bung is available individually and is made of mild good weldable steel.

This bung is Ø25mm x 30mm which is counterbored for M12 hex bolts and a through hole of Ø12,5mm. The bung can be used for hanging an oil - or gas tank, you can make sissy bars, a fenderstrutz, an engine mount, etc. with it.

This bung is Ø20mm x 30mm which is counterbored for M10 hex bolts and a through hole of Ø10,5mm. The bung can be used for hanging an oil - or gas tank, you can make sissy bars, a fenderstrutz, an engine mount, etc. with it.