Biltwell

Biltwell is the Biker Scene Rebel since 2005. Back in 2005, there was a group of bikers that absolutely loved customizing their engines. However, the friends considered that most of the awesome parts were really overpriced.

With the intent of changing that fact, Biltwell was founded in 2005. The company offered high-quality motorcycles parts, gear and clothing at a competitive price.

Read more
Popularity
Show:
24
Biltwell EXFIL-48 BACKPACK. BLACK
Biltwell
EXFIL-48 BACKPACK. BLACK
Designed with on-bike, or even off-bike, travels in mind. To visualize the main interior volume, it holds 48 beer cans of 355cc.
€191,08
Add to cart
e
tuv
Biltwell Borrego Gloves - Redline
Biltwell
Borrego Gloves - Redline
Borrego gloves are CE certified for motorcycle operation, which means a lot if you care about comfort and protection. Built tough on the outside, with a fleece Lycra half liner to absorb sweat.
€102,53
Add to cart
Biltwell Enamel Pin Winged Wheel - Brass
Biltwell
Enamel Pin Winged Wheel - Brass
Antique brass die-struck pin with post(s) and black rubber backers for easy install to your favorite hat, jacket, scarf, vest, bag, etc.
Biltwell STASH TUBE - SILVER / CLEAR
Biltwell
STASH TUBE - SILVER / CLEAR
Assembly: fasteners on license plates of the US specification fit into the L-brackets on the Stash tube to hold the whole in place. Plastic tubes house documents and contraband to keep information and equipment safe.
€49,49
Add to cart
Biltwell STASH TUBE - Black
Biltwell
STASH TUBE - Black
Construction: CNC lathe twisted alloy end caps; black galvanised steel hardware; robust polycarbonate transparent tubes.

Assembly: fasteners on license plates of the US specification fit into the L-brackets on the Stash tube to hold the whole in place.
€46,67
Add to cart
Biltwell Lane Splitter Cheek Pad Set - (Choose Size)
Biltwell
Lane Splitter Cheek Pad Set - (Choose Size)
For our Lane Splitter helmet, the cheek pads are detachable so you can swap out worn-out, grimy ones or adjust comfort by switching to a thinner or thicker set, as desired.
€16,80
Add to cart
Biltwell Murdock Pullback Risers "10"-Tuv Approved-Black
Biltwell
Murdock Pullback Risers "10"-Tuv Approved-Black
Gloss black electroplated finish. TUV approved. With 2" (5.1cm) pullback. For 1" (25.4mm) handlebars. Constructed from investment cast steel upper & threaded lower. Riser tubes are TIG welded seamless 4130 chromoly with 3mm thick tubing and 1/2-13 threade
€366,76
Add to cart
Biltwell "1"Whiskey Throttle Sleeve-(Choose Color)
Biltwell
"1"Whiskey Throttle Sleeve-(Choose Color)
Throttle tubes, manufactured from CNC machined tough 6061-T6 aluminum for lightweight strength and positive throttle control. Designed to be used regular aftermarkt grip sets. Compatible with throttle assemblies as used on 74-up H-D models with both singl
€71,40
Add to cart
Biltwell Zero Drag Handlebar 1", Tuv Approved – Black
Biltwell
Zero Drag Handlebar 1", Tuv Approved – Black
Smooth. Classic Drag bar the Biltwell way. Manufactured from 1" diameter .120" (3mm) thick madrell bent seamless 4130 chromoly steel. Bars are not knurled at the risers. This non-knurled design offers a larger clamping area which provides more grip. Comes
Biltwell 1" Kung Fu Grips Black TPV
Biltwell
1" Kung Fu Grips Black TPV
Get a grip with these babies! Just take a look at the pictures... This should be enough to convince you that these are the grips for your cafe racer or any other project! Squishy surface design is comfortable the minute you sink your fists into them. Medi
€20,51
Add to cart
Biltwell Murdock Pullback O/S Risers 8" | (Choose Color)
Biltwell
Murdock Pullback O/S Risers 8" | (Choose Color)
It has electroplated finishes in black or chrome and comes with approval. It is suitable for 1-1/8 (28.6mm) handlebars. It comes with 2"(51mm) Pullback, investment-cast steel upper and threaded lower construction.
€390,87
Add to cart
Biltwell Script Sticker White | (Choose Size)
Biltwell
Script Sticker White | (Choose Size)
Whatever you choose to call them—rub-ons, die-cuts, TDCs—these are the premium stickers from Biltwell that you apply and then remove the transparent paper backing off.
Biltwell Tyson Handlebar 12", Tuv Approved – Black
Biltwell
Tyson Handlebar 12", Tuv Approved – Black
Styled after the classic T-bars, with an updated look, and it'll do great as a club style bar. Approx. dimension 30" wide x 2.75" pullback. Risers will fit upper triple trees with 3.5" center to center riser spacing. Manufactured from precision mandrel be
€354,86
Add to cart
Biltwell Slimline "1-3/4 Risers "1" Handlebars (Choose Color)
Biltwell
Slimline "1-3/4 Risers "1" Handlebars (Choose Color)
Polished/Gloss black electroplated finish.TUV approved. Investment cast stainless steel.
Classic shaped design with a short 1-3/4" rise. 1/2-13 threaded.

Fits: > 1"/25.4mm handlebars
Biltwell Gringo S ECE Cheek Pads 33 mm
Biltwell
Gringo S ECE Cheek Pads 33 mm
BILTWELL ECE GRINGO/GRINGO S CHEEK PAD SET - 33 mm
Gringo and Gringo S cheek pads feature synthetic open-cell foam padding in a range of different thicknesses for customizable comfort. This material 'breathes" to accelerate drying and to reduce moisture
€17,12
Add to cart
Biltwell Lane Splitter Anti Fog Visor Clear
Biltwell
Lane Splitter Anti Fog Visor Clear
Lane Splitter Anti Fog Visor Clear
Biltwell Seat Hinge Kit Polished Stainless Steel
Biltwell
Seat Hinge Kit Polished Stainless Steel
Biltwell's investment-cast stainless-steel seat hinge is so rugged and beautiful, we know master builders who have taken it with them after selling their personal bike. Will easily outlast every other part on your custom motorcycle. After investment ...
€132,77
Add to cart
Biltwell Shield Logo Shop Banner | Black, White
Biltwell
Shield Logo Shop Banner | Black, White
Dimension of this product is 18" x 48". Further, Biltwell Shield Logo Shop Banner is Black/White in color.
Biltwell 1" Handlebar Tracker Mid | (Choose Color)
Biltwell
1" Handlebar Tracker Mid | (Choose Color)
Handlebar in Satin Black and Chrome electroplated 4130 seamless chromoly tubing with a 3mm wall thickness and CNC machined slots with an internally tapered bar for cutting-edge throttle module integration.
€207,27
Add to cart
Biltwell 1" Chumps Handlebar 8" Rise | Chrome
Biltwell
1" Chumps Handlebar 8" Rise | Chrome
Chrome handlebar made of 4130 seamless chromoly tubing with a 3mm wall thickness, CNC machined slots, and an internally tapered bar for cutting-edge throttle module integration.
Biltwell Tracker O/S Handlebar Tuv Approved-(Choose Color)
Biltwell
Tracker O/S Handlebar Tuv Approved-(Choose Color)
Matte black electroplated/Chrome ; 4130 chromoly with 3mm wall thickness; Dimpled; Comes with a larger 1-1/8" (1.125" or 28.6mm) diameter center for use with motocross risers; Bar tapers to 1" at the controls; Approx. dimensions: 30.5" wide x 2.25" high x
€307,95
Add to cart
Biltwell Biltwell Utility Round Mirror Ece Approved-Choose Color
Biltwell
Biltwell Utility Round Mirror Ece Approved-Choose Color
With 1" I.D. clamp-on mount. ECE approved. Die-cast construction with an adjustable stainless steel ball socket construction, allowing left/right side or up/down installation. Clear convex tempered glass to widen your field of view for added safety. With
€166,28
Add to cart
Biltwell Throttle Cable Adapter Set
Biltwell
Throttle Cable Adapter Set
Replacement adapters for Biltwell's Whiskey throttle clamp assemblies. These cable adapters install in the throttle clamp. They offer the required internal threads and 96-up clip-style adapters for installation of any 74-21 H-D throttle and idle cable.
Biltwell Tracker High O/S Handlebar TBW Tuv Approved – Chrome
Biltwell
Tracker High O/S Handlebar TBW Tuv Approved – Chrome
This TUV-approved handlebar, with a tapered and butted 4130 chromoly construction, fits popular 1-1/8 inch ID aftermarket risers and accepts stock Harley Davidson hand controls and throttle by wire technology. Including CNC mandrel-bent radiuses for laser
Popularity
Show:
24

Biltwell

Biltwell range consists of many products that will ensure that you can completely customize your Café Racer or Chopper according to your taste. Grips, handlebars, seats, lights and mirrorsare now customizable. Your bike can have the style you want and now that it has a trendy look, you need one as well! The Biltwell helmets, gloves and other clothing parts will make sure you make a good-looking combo.

Each Biltwell helmet, pair of gloves or another product has been designed and produced with that philosophy. Therefore, they will always be sturdy and easy to use.

 

Biltwell Product Line

Biltwell is a real trendsetter in terms of style when it comes to the aesthetics of your Café Racer of Custom bikes. Make your bike unique with Biltwell parts.

 

Biltwell Grips

The Biltwell Thruster, Biltwell Torker, Biltwell Renegade, Biltwell Kung Fu and Biltwell Recoil grips are a real concept in the Café Racer and custom bike world. These durable grips are available in a wide range of colours and guarantee a comfortable grip.

They are available both in metric size for Japanese and European motorcycles and in inches for the American motorcycles!

 

Biltwell Helmets

The Biltwell Bonanza, Biltwell Gringo and Biltwell Lane Splitter are all unique helmets that have turned the market upside down.

 

Biltwell Bonanza / ECE

The Bonanza is the most sold helmet at the moment! Available in the most striking colours and designs, the Bonanza is the perfect helmet for the wardrobe of any Café Racer or Custom rider. Furthermore, the Bonanza is characterized by a great fit and high-quality finish. That same finish ensures that the Bonanza helmet is very comfortable around your head during long rides.

 

Biltwell Gringo / Gringo S / ECE

With the Gringo S and the Gringo, Biltwell has put a great full-face helmet on the market that combines an awesome retro look with modern technology. Available with a fixed folding visor or just old school with snap fasteners for one of the many retro visors that Biltwell supplies for the helmet.

You will also find the awesome colours of the Bonanza helmets for the Gringo and the Gringo S as well! If you prefer a darker and subtle look rather than a flashy metallic flake silver, that is not a problem. Everything is possible!

 

Biltwell Lane Splitter/ ECE

The Lane Splitter is without a doubt the most striking helmet from the Biltwell line. With the sleek design of its chin piece, the helmet reminds us of racing helmets from the '80s and' 90s. The design guarantees comfort and is hardly sensitive to wind, which makes it perfect for longer rides on your Café Racer!

With its aggressive look, the Biltwell Lane Splitter is perfect for everyone who wants maximum protection but can handle an eventual traffic light sprint.

 

Biltwell Visors

Biltwell offers a wide variety of visors, which is the perfect accessory for your Gringo, Gringo S or Bonanza helmets. From black to mirror gold, from flat to Bubble-style, everything is possible with the snap button system used on the Gringo and Bonanza helmets. The visors are even interchangeable between the two models.

 

Biltwell Gloves

The company also offers different pairs of gloves so that every rider can find his heart’s desire. The Moto Gloves are a nice set of summer gloves and will be perfect for any rider who values the freedom of movement offered by a short glove. Moreover, the breathable fabric is ideal for summer days.

The Gauntlet and Work gloves are made out of beautiful supple leather and combine both a retro look and a high level of protection, thanks to the use of buffalo leather. Just like the other products from the Biltwell line, you can also get the gloves in a lot of different colours. This way, they will always fit your motorcycle or your Gear.

With the Bantam gloves, you combine the best of both worlds, supple leather in the places where you want maximum protection, but also flexible and breathable fabric where it is needed the most.

You can fit the current line of gloves here: link

The company also supplies nice hard parts for your Café Racer or Custom motorcycles.

With the Utility mirrors, you get your hands on retro-styled mirrors that fit perfectly with Grips and Whiskey-Throttle gas handles. Both are made from high-quality material and are the perfect replacement for the often old-fashioned standard mirrors and gas handles.

You can find these parts in our shop, here: mirrors, gas handles

 

Biltwell Seats

Biltwell also supplies a line of awesome seats for Harley Davidsons and Triumphs. The seats are of excellent quality, as is it expected from the brand. It will definitely be worth your money.

You can find them here: Link

 

Top 5 selling products

Advantages

  • High quality
  • Perfect fit
  • Affordable
  • Modern design

Disadvantages

  • Some products are not available for the metric system
  • Delivery time can take more time