Motone

 

Unlike many other brands Motone has a complete end to end control of the manufacturing process of the products for their own label to guarantee a perfect quality.

Read more
Popularity
Show:
24
Motone Daytona 955i/T595 Engine Gasket Kit
Motone
Daytona 955i/T595 Engine Gasket Kit
Daytona 955i/T595 Engine Gasket Kit
€24,95
Add to cart
Motone Fuel/Gas Cap Cork Gasket 62 mm x 42 mm x 2.5 mm
Motone
Fuel/Gas Cap Cork Gasket 62 mm x 42 mm x 2.5 mm
Fuel/Gas Cap Cork Gasket 62 mm x 42 mm x 2.5 mm

A single Cork Gasket with measurements of 62 mm outer ring, 42 mm inner ring, 2.5 mm thickness.
Suitable for fuel/gas caps that can fit these measurements.
Motone Cafe Racer Badge
Motone
Cafe Racer Badge
CNC Cut from billet aviation 6061-T6 aluminium - custom badge - self-adhesive with laser cut 3M tape on the back. Good to Go.

Each badge is 8 cm (3.14 inches) diametre.

CAFE RACER

Suitable for external use on any Motorcycle, Car or Truck.
Motone Honda CB 750 Side Panel/Cover/Petrol Tank Badge Set K1/K2/K4 - Billet - Pair
Motone
Honda CB 750 Side Panel/Cover/Petrol Tank Badge Set K1/K2/K4 - Billet - Pair
CNC Cut from billet aviation 6061-T6 aluminium - PAIR of custom Honda badges - self-adhesive with laser cut 3M tape on the back.
Machined out one-by-one on a milling table before being polished and painted.
€32,95
Add to cart
Motone RHS Ignition Relocation Bracket - BLACK
Motone
RHS Ignition Relocation Bracket - BLACK
Top Quality custom CNC milled from aviation grade billet 6061t aluminium. This sale is for the complete ignition switch relocation bracket. Includes bolts and spacers as pictured.

Helps tidy up the front end of your motorcycle and allows you to move th
€32,95
Add to cart
Motone Lay Flat Dash - Gauge - Speedo/Tacho Clock Mount Bracket - VDO
Motone
Lay Flat Dash - Gauge - Speedo/Tacho Clock Mount Bracket - VDO
Custom milled out of aviation grade billet 6061t aluminium sheet and finished in hard black.

Note - this bracket lays the meters flat so they are aligned with the yoke allowing a much cleaner looking front end on your bike.
€40,95
Add to cart
Motone Ballista brass valve caps
Motone
Ballista brass valve caps
Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle wheel. These are Sold as a Pair and available here in brass finish.
€20,95
Add to cart
Motone Street Twin Speedo Bracket
Motone
Street Twin Speedo Bracket
As the stock Triumph Street Twin is designed from the factory with a one piece Headlight and Speedo bracket assembly if you want to swap out the headlight brackets for something a little more subtle - or mount the light at a different orientation you'll a
€58,95
Add to cart
Motone Triumph Scrambler clutch cable
Motone
Triumph Scrambler clutch cable
Triumph Scrambler clutch cable
€23,95
Add to cart
Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap
Motone
Billet Disc Brake Oil Reservoir Master Cylinder Cap
CNC Cut from billet aviation 6061-T6 aluminium - fits all Hinckley Triumphs with this shape master cylinder cap.

Will not fit the round shaped reservoirs as fitted to some models with 7/8" bars.

Some models it will fit include Bonneville, T100, ...
€30,95
Add to cart
Motone Billet Fork Brace - Chrome
Motone
Billet Fork Brace - Chrome
Custom CNC milled from aviation grade billet 6061t aluminium.

This sale is for the Fork Brace as pictured CHROME FINISH.

Designed to reduce torsional stress on the forks and thus maintain fork alignment at speed and around the twisties.

C...
€136,95
Add to cart
Motone Custom Billet Indicator Turn Signals - Set of 4 - Black/Brass
Motone
Custom Billet Indicator Turn Signals - Set of 4 - Black/Brass
Motone Billet Turn Signals

This sale: 2 pairs (4 turn signals) - anodised black/brass(amber bulbs, both amber and clear lenses are included)
Motone Bel Air Tail Light + Fender Mount Kit - Shot Blast
Motone
Bel Air Tail Light + Fender Mount Kit - Shot Blast
Bel Air Tail Light + Fender Mount Kit - Shot Blast. Works as Running Light, Brake Light and Number plate illumination through a window on the underside. Die-cast Aluminium with a Shot Blast.
€68,95
Add to cart
Motone Universal Solo Seat Pan Chop/Chopper/Bobber+Foam DIY KIT
Motone
Universal Solo Seat Pan Chop/Chopper/Bobber+Foam DIY KIT
Motone chop seat pan as pictured in black + Mould Formed Foam + Stainless Spring Bolts

Laser cut out of 2.5 mm thick steel sheet - pressed formed kick up at rear - ribbed for strength - powder coated black - ready for action.

Width 300 mm (11.8...
Motone Custom Fuel Gas Cap - Billet Aluminium - Rippled
Motone
Custom Fuel Gas Cap - Billet Aluminium - Rippled
Custom lathed out of aviation grade 6061t Aluminium.

This sale is for the complete new cap fully assembled and ready to fit on your bike.
€64,95
Add to cart
Motone Custom Top Riser Clamp Bridge Piece - for One Inch Bars - Silver
Motone
Custom Top Riser Clamp Bridge Piece - for One Inch Bars - Silver
Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium.

These handlebar top clamps replace the standard ones on your stock factory riser assembly.
€43,95
Add to cart
Motone 3 Button Switch 22MM or 7/8"Chrome
Motone
3 Button Switch 22MM or 7/8"Chrome
3 Button Switch 22 mm - 7/8" Chrome. This switch fits perfectly on a 7/8-inch bar and has 3 buttons. Very high quality and works perfectly with the M-Unit.

The quality is comparable to the switches from Motogadget.

Specifications:...
€83,95
Add to cart
Motone H4 extension cable
Motone
H4 extension cable
Plug and play headlight module. Suitable for any H4 Headlight. This cable extension allows you to move the light further than the stock loom allows for without you having to cut and splice anything.
€13,95
Add to cart
Motone Turn Signal Brackets Top Shock Mount Chrome
Motone
Turn Signal Brackets Top Shock Mount Chrome
Top Quality custom CNC milled from aviation grade billet 6061t aluminium. This sale is for a set of two turn signal/indicator brackets here in black (also available in polish) - mounts on the top shock between the shock and the outer bolt.
€16,95
Add to cart
Motone Yamaha XS650 Alternator Cover - Finned - Polish
Motone
Yamaha XS650 Alternator Cover - Finned - Polish
Suitable for all year Yamaha XS650 motorcycles. Replacement for the "Yamaha" Stock Cover
€43,95
Add to cart
Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack
Motone
Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack
CNC cut from billet aviation-grade 6061-T6 aluminum. This part is compatible with all Hinckley Triumphs with this specific master cylinder cap shape.
Motone Miller Black Stop Tail Light and Number Plate Holder - Loom KIT
Motone
Miller Black Stop Tail Light and Number Plate Holder - Loom KIT
This kit is a solution to the factory stock tail light with a bulb.
€100,95
Add to cart
Motone 3 Button Switch 25.4MM or 1" Chrome
Motone
3 Button Switch 25.4MM or 1" Chrome
3 Button Switch 25.4 mm or 1" Chrome. This switch fits perfectly on a 1-inch bar and has 3 buttons. Very high quality and works perfectly with the M-Unit. 

De afwerking en kwaliteit zijn erg goed en...
€81,95
Add to cart
Motone Triumph Bonneville America Clutch Cable
Motone
Triumph Bonneville America Clutch Cable
Triumph Bonneville America Clutch Cable
€23,95
Add to cart
Popularity
Show:
24

Motone

Motone® is the industry-leading manufacturer of custom motorcycle parts for the Triumph Bonneville range and beyond. Motone’s philosophy is fairly simple: design is above all. The brand uses modern technology to make affordable high-quality custom motorcycle parts and clothing for just about every need.

The modern Triumph Twin range has been a big part of what they do at Motone Customs from the very start. From custom tanks and seats to exhaust systems, Motone has a wide range of innovative products designed to let you take control over the look and feel of your Triumph motorcycle. The motivation behind alot of the parts Motone has made is to take the design that came out of the Hinckley factory and make it better. Motone works hard on new products every single day to improve the Triumph Bonneville series of motorcycles. Plus, the brand offers custom parts for Yamaha and Harley. Unlike many other brands you'll find out there Motone has complete end-to-end control of the manufacturing process of the products it creates.

In our shop you can find a wide range of Motone products like Cafe racer seats, fenders and turn signals.