Pressol | EasyFill Grease Gun Black 400 Bar Dual-Handed

Looking for a reliable manual grease gun to pump grease into grease nipples by hand? The Pressol EasyFill is a dual-handed (two-handed) grease gun finished in black, built around a pressure-side M10x1 connection. It accepts standard 400 g grease cartridges and feeds grease through a 300 mm high-pressure hose fitted with a precision machined 4-claw M10x1 coupler. As a manual lubrication pump intended for repeated workshop use, its piston, cylinder and O-ring are machined to a 6 µm tolerance to avoid dummy (apparent) lubrication, keeping grease delivery consistent stroke after stroke.

Key Features

• Dual-handed (two-handed) grip style
• Black finish
• Pressure-side M10x1 threaded connection
• 300 mm high-pressure hose, 11 mm diameter
• Precision machined 4-claw coupler, M10x1 male thread
• Hose bracket included
• 10 follower plates included
• Rolled thread on grease gun tube for 1.5-turn screw-in
• Quick ventilation via half-turn of tube, ventilation valve and filling nipple
• Ergonomic, non-slip handle
• Optimised hand lever kinematics for low-effort pumping
• Sealed screw connections
• TÜV SÜD certified with GS mark for Tested Safety
• 6 µm piston, cylinder and O-ring tolerance (no dummy lubrication)
• 0.4 µm Ra surface finish on piston tube
• Zinc die-cast (Z410) grease gun head
• Polished steel reciprocating piston
• Galvanized ball seat valve
• Delivery volume remains nearly unchanged after 40,000 operating cycles at 200 bar back-pressure

Specifications

• Connection (pressure side): M10x1
• Capacity: 400 cm³
• Refill: 400 g grease cartridges (DIN 1284)
• Grease piston diameter: 10 mm
• Actuation: manual lever
• Delivery rate: 2.2 cm³ per stroke
• Discharge pressure: up to 400 bar
• System burst pressure: 900 bar
• Head burst pressure: 1200 bar
• Tube wall thickness: 1 mm
• Dimensions (L x W x H): 380 x 185 x 66 mm
• Weight: 1.02 kg
• Grease compatibility: NLGI up to 3, usable from 10°C
• Hose: 300 mm x 11 mm, M10x1 male thread with sealing ring
• Coupler: 4-claw, M10x1 female thread
• Follower plates included: 10
• Colour: Black

Usage & Care Tips

• Screw the grease gun tube into the head using the rolled thread, requiring only 1.5 turns for a secure fit
• Vent the pump by turning the tube half a turn and using the ventilation valve and filling nipple
• Use only with NLGI grease up to grade 3, at ambient temperatures of 10°C or above