Pressol | Standard Grease Gun Manual Lever M10x1

Need a manual lubrication tool that applies grease consistently through a standard grease nipple? The Pressol standard grease gun is a lever-operated grease pump with an M10x1 male threaded filling nipple, built for manual greasing of bearings, joints, and fittings. It takes 400 g grease cartridges or bulk grease and can generate pressure up to 400 bar.

Key Features

• Discharge pressure up to 400 bar
• Burst pressure of the system up to 850 bar
• Burst pressure of the grease gun head up to 1200 bar
• Takes 400 g grease cartridges (DIN 1284) or bulk grease via spatula
• M10x1 male threaded filling nipple
• Suitable for greases up to NLGI grade 2 at 20°C
• Exactly fitting plunger for bulk grease or cartridge use
• Made according to DIN 1283
• TÜV SÜD-certified with GS mark for Tested Safety
• Pump piston with high accuracy of fit to the cylinder (no dummy apparent lubrication)
• Performance unchanged after 40,000 actuating cycles
• Grease gun head in zinc die-casting Z 410
• Deep band knurls for sure grip handling
• Safe L-design handle on the push rod
• Slip-resistant handle on the grease gun lever
• Plunger rod clamp on end cap for manual spring pressure on bulk grease or damaged cartridges
• Optimum lever efficiency for low lubrication effort
• High-speed ventilation by half a rotation of the grease gun tube
• Loose cover
• Silver lacquered finish

Specifications

• Connection, pressure side: M10x1
• Capacity: 500 cm³
• Refilling: 400 g grease cartridge (DIN 1284) or bulk grease via spatula
• Grease piston diameter: 8 mm
• Actuation: manual lever
• Delivery rate per stroke: 1.2 cm³ (grease density 0.92 kg/dm³)
• Discharge pressure: up to 400 bar
• Burst pressure (system): 850 bar
• Burst pressure (grease gun head): 1200 bar
• Push rod operation: L-design handle
• Cover: loose
• Wall thickness of grease gun tube: 1.0 mm
• Finish: silver lacquer
• Dimensions L x W x H: 395 x 120 x 66 mm
• Weight: 1.27 kg
• Compatible accessories: high pressure hose M10x1 male, 8 x 300 mm; hydraulic coupler M10x1 female

Usage & Care Tips

• Use the plunger rod clamp on the end cap to apply manual spring pressure when compressing bulk grease, or to force in the plunger of a damaged cartridge
• Perform a half rotation of the grease gun tube for high-speed ventilation before use
• Use only greases up to NLGI grade 2 at 20°C for correct operation
• Handle the loose cover carefully when opening the tube to refill with a cartridge or bulk grease

Fitment

• Universal fitment