Daytona | Velona 80 mm Speedo/Tachometer 14,000 RPM

Looking for a single gauge that shows both road speed and engine revs without cluttering your cockpit with two separate dials? The Daytona Velona is a combined speedometer and rev counter (tachometer) housed in one 80 mm body, noticeably larger than the usual 60 mm Daytona gauges, making it easier to read at a glance. Riders who want a bold, unique instrument that still packs full digital functionality will appreciate this unit over a standard mechanical speedo or tach. This gauge offers Universal Fitment and can be fitted to virtually any motorcycle, provided a suitable speed/pulse signal is available.

Key Features

• Combined speed and RPM readout in a single 80 mm gauge
• Matte black housing made from stainless steel
• White LED illumination
• LCD readout with multiple functions
• Stepping motor-driven pointer for fast, accurate needle movement
• Selectable km/h or MPH display
• Non-resettable odometer
• Resettable dual trip meter
• Maximum speed memory and recall
• Maximum RPM memory and recall
• Adjustable shift-up warning
• Connects to an OEM electrical speed sensor if the vehicle is equipped with one
• Selectable PPR (Pulse Per Rotation) setting: 1P-1R / 1P-2R / 2P-1R / 30P-1R
• V-shaped mounting bracket and hardware included
• Two mounting points on the back for installation
• Two buttons on the back for easy setting and operation

Specifications

• Diameter: 80 mm
• Height: 40 mm
• Housing material: Stainless steel, matte black finish
• Display: LCD, white LED illumination
• Speed unit: km/h or MPH, selectable
• Odometer range: 0.0-99,999.9 km (or miles), not resettable
• Trip meter range: 0.0-99,999.9 km (or miles), dual, resettable
• RPM meter range: 0-20,000 RPM
• Voltmeter range: 0.0-18.0V
• Operating voltage: DC 9-16V (12V system)
• PPR settings: 1P-1R / 1P-2R / 2P-1R / 30P-1R
• Mounting: V-shaped bracket with two rear mounting points

Usage & Care Tips

• Set the correct PPR value for your specific speed sensor or pulse source before first use
• If your motorcycle has no digital speed output available, a separate sensor (type 900404) is recommended to enable the speed function
• Use the two buttons on the back of the gauge to switch between km/h and MPH, configure PPR, and reset the trip meter
• Check local approval and homologation status for your specific motorcycle model and year before fitting, as requirements vary by region
• Mount the gauge using the included V-shaped bracket and the two rear mounting points for a secure, vibration-resistant fit