Pressol | HDPE Army Fuel Can, Dark Gray, 20 Liter

This HDPE army fuel can from Pressol is a 20 liter jerrycan made of high density polyethylene, intended for storing and transporting liquid fuels. As a fuel container, it is UN approved (UN 3H1/Y/150/..../CZ/PRES-IMET 1228) and its dimensions are compatible with military jerrycans, making it a lightweight alternative to the traditional metal version.

Key Features

• Flexible discharge spout that can be stored inside the jerrycan
• Integrated ventilation in the discharge spout
• Screw-on cap secured against loss with a fixation strap
• UN approval for fuel storage and transport
• Dimensions compatible with military jerrycans
• Rust-free and impact-resistant HDPE construction
• Lightweight: 1.45 kg total weight versus 4.85 kg for the metal version
• Less water condensation inside the can
• Lower temperature conductivity compared to the metal version
• EAN bar code

Specifications

• Capacity: 20 L
• UN approval: UN 3H1/Y/150/..../CZ/PRES-IMET 1228
• Material jerrycan: HDPE (high density polyethylene)
• Colour of can: dark grey, RAL 7021
• Material locking cap and adapter: polypropylene
• Material discharge spout and fixation strap: LDPE (low density polyethylene)
• Colour locking cap: red, RAL 3001
• Colour fixation strap and adapter: steel-grey, RAL 7011
• Colour discharge spout: white, transparent
• Length of discharge spout: 245 mm
• Outer diameter of discharge spout: 20 mm
• Height: 480 mm
• Base dimensions (L x W): 350 x 175 mm
• Weight: 1.45 kg

Usage & Care Tips

• As of 01.06.2015, fuel cans must be labelled by the end user according to the GHS / CLP regulation; use the correct diesel or gasoline label for identification
• Store the discharge spout inside the jerrycan when not in use to avoid contamination during transport in a vehicle
• Suitable for liquid fuels