Lithium Battery Module Kit CCA360 12V 6.9 AH - Flat Model

For motorcycles with electric starter

This protective box is completely made by 3D printing and is made to house and protect the Battery lithium CCA360 12V 6.9AH battery; It has mounting brackets with holes with a diameter of 5 mm; Dimensions: 151 x 61 x 83 mm; Protection box for start battery.

Benefits :

• A featherweight : on average 6 times lighter, this battery is used in competition to make motorcycles lighter.
• A battery suitable for all models : its small size means it can be installed anywhere. Its connection system allows adaptation to all clamp models - positive clamp left or right, etc.
• Simple and fast installation : ready to use, no need to be filled with acid. It can be used once installed, without needing to be loaded.
• Long life : no more malfunctions.
• Quiet, maintenance-free winter : the battery can be isolated using the connector - an operation that takes only 10 seconds and requires no tools. It can stay outside as it can withstand temperatures down to -30 ° C. There is no need to charge it during these long periods. It can remain unused for up to 3 years.
• The battery is designed to prevent the battery from igniting or exploding in the event of a strong impact or a flat tire.
• Fast charging : after a start, the battery charges in less than 60 seconds.
• An environmentally friendly battery : no heavy metals in the battery.