Highsider Rocket Module LED rear-, brake-, turn signal light - suitable for installation or surface mounting - with black aluminium ring and tinted glass, for rear E-tested.

Inspired by organic shapes, Highsider product development has designed a completely new housing shape without losing sight of the past.
The slim, round shapes support the classic associations of the viewer.

In the center 6 very bright SMD LEDs are built in. The outer ring consists of COBs (Chip On Board).
Thanks to the new LED chip embedding for high-performance LEDs, a very high luminance can be achieved with the best possible efficiency and service life.
In this way, higher light values can also be achieved than with conventional LEDs. This combination comes with a black anodised aluminium ring that fits over the body.

The Highsider rear light and tail light/indicator series will definitely give you the safety you need and the look you want.

Dimensions
Diameter B: 45 mm
Depth A: 14 mm
Alu housing: Diameter: 45 mm (with aluminium ring)
Depth: 10 mm
Diameter: 40 mm (without aluminium ring) x Depth.10 mm
Fixing bolt: M8 x 1.25 mm x length 18 mm.

connections:
black cable = ground (-)
yellow cable = taillight (+)
red cable = stoplight (+)
blue = turn signal (+)

1 pair

note:
the combination can be installed flat without aluminium ring, so that only the lens is visible. A 40 mm wide hole must be drilled for this purpose.
Alternatively, the combination can be mounted with the aluminium ring on e.g. a mounting plate on the vehicle.