This Side Mount is made for Dutch and Belgian license plates (210 mm x 140 mm). It is made of 5 mm steel, tumbled, sandblasted, treated with a zinc primer and then with a matt black texture powder coated for a beautiful finish!
You can mount it on the left side to your rear axle.
The supplied light is a replica of the original Miller Stop light of the 2-Stroke VINCENT bikes from 1946 to 1953. The light is fully equipped with LEDs which provide tail light, brake light and license plate illumination. The light is equipped with 15 cm wiring. You can use the light directly on the wiring without a resistor. This light has an E-Mark.
This Side Mount comes complete with stainless steel hardware to attach your license plate on the Side Mount.
This Side Mount fits on the following Harley Davidson motorcycles. You may need a Spacer:
- For HD Softail/HD BigTwin and HD Dyna 2008 and up you don't need a Spacer
- For HD Softail/HD BigTwin and HD Dyna up to 2007, you'll need a "Side Mount Spacer 3/4 (19 mm)"
- For HD Sportster you'll need a "Side Mount Spacer 1/2 (13 mm)" (Shock mount)
For all other brands of motorcycles:
This Side Mount fits every Bobber or Chopper.
The mounting hole in the Side Mount is 26 mm (1 inch). We sell spacers to decrease the mounting hole (26 mm) to 19 mm ("Side Mount Spacer 3/4 (19 mm)") or to 13 mm ("Side Mount Spacer 1/2 (13 mm)"). It is also possible to machine your own spacer to mount the Side Mount neatly to your rear axle.