Nederlands
Deutsch
English
Français
Español
ItalianoNo products found...
We have put together this cable set as a "carefree package" for hobbyists who do not constantly work on motorcycles, conversions and the purchase of goods not worth the money. The cable set is designed to be sufficient for most motorcycles.
With this kit, you can quickly and easily create a complete harness for your bike. A 6-wire shielded control cable allows fast and secure wiring from the buttons or switches to the box. The different cable colour for the load cables, as well as the supplied labelling hoses, make confusion-proof wiring easy. In addition, 30 cm shrink tubing, 8 labeled heat shrink tubing, and 30 cable ties in 2 different sizes are included.
| Delivery: | |
| Control cable 6 x 0.14, shielded, 4.9 mm outside diameter | 2 m |
|---|---|
| Black 0.14 mm² for the ground wiring in the handlebar | 2 m |
| Red 1.5 mm² for powering the box | 2 m |
| Black 1.5 mm² for the ground connections in the bike | 3 m |
| Brown 0.75 mm² for the turn signals front and rear | 3 m |
| Violet 0.75 mm² for the turn signals front and rear | 3 m |
| Orange 0.75 mm² | 2 m |
| White 0.75 mm² | 2 m |
| Gray 0.75 mm² | 2 m |
| Yellow 0.75 mm² | 2 m |
| Green 0.75 mm² | 2 m |
| Blue 0.75 mm² | 2 m |
| Heat shrink tubing, approx. 2 cm long, labeled | 8 pieces |
| Heat shrink tubing, approx. 30 cm, unlabelled | 1 piece |
| Cable tie small, black | 15 pieces |
| Cable tie big, black | 15 pieces |
